SpartanBar
Whether you’re on your daily route or offroad, having the right frontal protection for your 4WD is essential. Don’t compromise. SmartBar’s tough, lightweight and durable bull bar design delivers the highest level of safety without the weight of regular metal bars. This is thanks to the bend and flex design, which allows our bull bars to absorb an impact and bounce back to shape to help increase the lifespan of your bar and keep you on course.
- Srs Airbag
- ADR
- AS 4876.1
- HIC
Features
- Proudly designed and manufactured in Australia
- Designed to suit the look of your Ford Ranger PX3 XL, XLS, XLT or WildTrak
- Can compress up to 85% and bounce back to 95% of its original shape within minutes of most animal strikes
- Less tyre wear and tear and fuel consumption*
- Increased bull bar lifespan and reduced repair bills*
- Lower tare weight*
- Non-corrosive, chip and rust resistant
- Available in winch compatible (up to 9,500lb) or non-winch versions
- Adds an approximate additional 180mm to vehicle length
- Fitted weight 35.5kg (non-winch) and 40kg (winch)
- Winch Recovery Kit option also available
- Compatible with a range of spotlights, ARB recovery points and UVP, and the original vehicle fog lights
- Supplied with 2 x antenna mounts and LED parker/indicator lights
- Optional antenna mount kit and 90mm fog/daytime running light kit
- Fitting: minimum 3 hours (non-winch)
- Properly fitted SmartBar bull bars will not affect your vehicle’s ANCAP rating
*than regular bull bar alternatives
Download Spec SheetFind your closest stockist
Your nearest store isBy submitting your postcode, you accept the terms and conditions of our privacy policy.
StealthBar
The industry award-winning StealthBar is turning heads internationally, having been seen in England, France, Czech Republic, Spain and Vietnam. It is the only bar approved for use in Europe and provides unparalleled pedestrian safety, while still delivering the highest level of vehicle and passenger protection that you would expect from any leading bull bar. Made in Australia using a lightweight, resilient and durable polyethylene material, set yourself apart from the pack.
- SRS Airbag
- ADR
- AS 4876.1
- HIC
Features
- Proudly designed and manufactured in Australia
- Designed to suit the look of your Ford Ranger PX3 XL, XLS, XLT or WildTrak
- Can compress up to 85% and bounce back to 95% of its original shape within minutes of most animal strikes
- Less tyre wear and tear and fuel consumption*
- Increased bull bar lifespan and reduced repair bills*
- Lower tare weight*
- Accepts original vehicle fog lights where applicable
- Non-corrosive, chip and rust resistant
- Available in winch compatible (up to 12,000lb) or non-winch versions
- Adds an approximate additional 130mm to vehicle length
- Fitted weight 24kg (non-winch) and 29kg (winch)
- Winch Recovery Kit option also available
- Compatible with Ford front parking sensors and OE adaptive cruise module (additional kit purchases required), ARB UVP and recovery points and a range of spotlights
- Supplied with 1 x antenna mount
- Optional additional antenna mounts, daytime running lights, 90mm fog/daytime running lights available
- Fitting: minimum 3 hours (non-winch)
- A properly fitted SmartBar bull bar will not affect your vehicle’s ANCAP rating
*than regular bull bar alternatives
Download Spec SheetFind your closest stockist
Your nearest store isBy submitting your postcode, you accept the terms and conditions of our privacy policy.
Rear Protection Bar
What better way to protect the rear of your vehicle than with SmartBar’s Rear Protection Bar (RPB). Complimenting the design and shape of the vehicle, our RPB maintains factory accessories and helps protect the canopy and pedestrians in the event of an impact.
Designed and manufactured in South Australia to extremely high standards, our RPB provides all the same levels of vehicle, occupant and pedestrian safety as the rest of our range.
Combining class-leading design, engineering and cutting edge manufacturing, the SmartBar Rear Protection Bar does not compromise on protection or performance. Winning several awards for innovation our RPB is more than just a bumper bar or rear step.
The hollow body construction and flexible, durable material absorbs impact forces in the event of a collision and returns to its original shape. Made from lightweight, polyethylene material, the life of your bar is prolonged, reducing expensive panel repairs.
Features
- Superior rear protection, due to the impact absorbing hollow construction.
- Articulates for increased departure angles.
- Compatible with both OE and after-market rear parking sensors.*
- High grip moulded in the tread pattern.
- Styled to maintain the Vehicle’s aesthetic.
- Will not catch or pool water.
- Maintains access to spare wheel.
- Reduced repair costs after impact
- UV stabilised polymer for durability and corrosion resistance
* parking sensor model must be ordered
Download Spec SheetFind your closest stockist
Your nearest store isBy submitting your postcode, you accept the terms and conditions of our privacy policy.
Get in touch
Under Vehicle Armour
A complete replacement of the vehicle’s OE skid pan, ARB SmartBar’s first Under Vehicle Armour (UVA) offers superior under vehicle protection for the Ford Ranger PXIII (Ranger PXII displayed here). Like the rest of our range, our under vehicle protection equipment is manufactured in South Australia using industry leading equipment, knowledge and proprietary materials.
The UVA weighs a fraction of any aftermarket alternative, is easy to install and remove for vehicle servicing and is compatible with the OE bumper, ARB SmartBar and ARB bullbars; and the ARB recovery point.
Features
- Weight savings provide improved fuel economy and reduced tyre, suspension and brake wear when compared with aftermarket alternatives
- Fitted weight of 8.6kg
- Easy disassembly for vehicle service access
- Deep rib structure provides continuous strength through entirety of UVA
- Increased protection against impact to inner CV joints
- Bracketry reinforcements to protect transfer case against impact
- Heat resistant material
- Non corrosive UV stabilised crosslink polymer
- Styled to complement the vehicle’s aesthetic
- Proudly designed and manufactured in Australia
- Minimal repair costs after impact
- Available in black
- Compatible with ARB recovery point
- Freight information: 1230mm x 870mm x 150mm (23kg)
Download Spec Sheet
Find your closest stockist
Your nearest store isBy submitting your postcode, you accept the terms and conditions of our privacy policy.